---
title: Elgato Camera Hub Not Detecting Your Camera? 7 Fixes
url: https://scrollcue.com/blog/elgato-camera-hub-not-working-fix
description: Facecam missing in Elgato Camera Hub? What to do about the macOS 27 Facecam issue, then seven fixes in order, from the USB 3 port to a clean reinstall.
author: Jude Eric
updated: 2026-10-31
---
# Elgato Camera Hub not detecting your camera? 7 fixes

Work down this list from the top. Most cases are fixed in the first three steps. Then put a teleprompter under that camera and get back to recording.

[Open the app *· Free*](https://scrollcue.com/app/) · [See pricing](https://scrollcue.com/pricing)

- Windows
- macOS
- Facecam and Prompter

- [YouTube](https://scrollcue.com/setup#recording)
- [Church Media](https://scrollcue.com/blog/church-teleprompter-setup-guide)
- [Podcasts](https://scrollcue.com/blog/cheap-teleprompter-setup-home)
- [Live Events](https://scrollcue.com/teleprompter-for-speakers)

## Quick answer

If Elgato Camera Hub does not detect your camera, plug it straight into a USB (Universal Serial Bus) 3 port on the computer with a data cable (no hub or dock), quit every other app using the camera, and update Camera Hub and the camera firmware. Most cases are fixed by those three steps. If not, check camera permissions on macOS or Windows, then reinstall Camera Hub cleanly.

- **Step 1**: Direct USB 3 port, data cable
- **Step 2**: Close other camera apps
- **Step 3**: Update app and firmware
- **Platforms**: Windows and macOS

![Laptop on a desk with a video call open and a webcam mounted on top](https://scrollcue.com/images/laptop-webcam-video-call-800.jpg)

A webcam on top of a laptop: once the camera works, the script goes right under it.

After the fix

## Camera working? Put your script right under it.

Once Camera Hub sees your camera again, run ScrollCue in a narrow window directly below it, use the Elgato Prompter as a display, or key the script into OBS (Open Broadcaster Software) where only you can see it.

[Start with the fixes](https://scrollcue.com/blog/elgato-camera-hub-not-working-fix#fixes)

4 topics

## Facecam and *macOS 27*

Updated to macOS 27 Golden Gate and your Facecam went dark? It is a known issue, not your cable. Here is what we know as of 31 October 2026.

01What is happening02The reported workaround03If it still does not work04Should I update to macOS 27?Read the full guideShow less

### What is happening

Facecam and Facecam Pro stop sending a picture.

After updating to macOS 27 Golden Gate, released on 14 September 2026, some owners of the Elgato Facecam and Facecam Pro report that the camera stops providing a signal. Elgato has a [help article on it](https://help.elgato.com/hc/en-us/articles/51602759211921-Camera-Stops-Working-after-Updating-to-macOS-27-Golden-Gate), and [Streamer.guide reported](https://streamer.guide/blog/macos-27-elgato-facecam-not-working) on 17 October that Elgato was working with Apple on a fix. Reports describe it as a software problem: the camera itself is not broken, so the USB fixes below will not help.

### The reported workaround

Change the USB transfer mode, then change it back.

In Camera Hub, set **USB Transfer Mode** to **Bulk**, then set it back to **Automatic** or **Isochronous**. Streamer.guide reports that, by Elgato's own count, this helped only 2 of 12 people, so try it, but do not count on it.

### If it still does not work

Use another camera for now.

Until a fix ships, record or stream with another camera. On a MacBook, the built-in camera with the script right under the notch keeps your eye contact; see the [MacBook guide](https://scrollcue.com/blog/teleprompter-for-macbook). An iPhone used as a webcam through Continuity Camera also works, with the script on the Mac screen under it.

### Should I update to macOS 27?

Not before a stream if you rely on a Facecam.

If you use a Facecam or Facecam Pro and have a stream or recording booked, hold off on macOS 27 until Elgato confirms a fix. Going back to macOS 26 is not a simple undo: it means erasing the Mac and restoring from a backup made on the older version.

7 topics

## Fixes, in *this order*

Start with the connection, then other apps, then permissions, then a clean reinstall.

011. Check the USB connection022. Close other apps using the camera033. Update Camera Hub and the camera firmware044. Allow camera access (macOS)055. Allow camera access (Windows)066. Reinstall Camera Hub cleanlyRead the full guide · 1 more topicShow less

### 1. Check the USB connection

Direct port, good cable, no hub.

- Unplug the camera and plug it straight into a port on the computer, not a monitor, dock or hub.
- Use the cable that came with the camera, or another one rated for data and USB 3. Charge-only cables power the camera without connecting it.
- The Facecam needs a USB 3 port. On many computers these are marked SS or coloured blue.
- Try a different port, then restart the computer with the camera plugged in.

### 2. Close other apps using the camera

Only one app can hold some cameras.

Quit OBS, Zoom, Teams, Slack, Discord and any browser tab with a video call, then open Camera Hub again. On a Mac, a green light next to the camera or a camera icon in the menu bar shows that something still has it open.

### 3. Update Camera Hub and the camera firmware

Old versions miss new cameras and fixes.

Download the latest Camera Hub from Elgato's website and install it over your current version. Then open Camera Hub's settings for your camera and install any firmware update it offers. Do not unplug the camera during a firmware update.

### 4. Allow camera access (macOS)

Privacy settings can block Camera Hub.

Open **System Settings › Privacy & Security › Camera** and make sure Camera Hub, and the app you record with, are switched on. Quit and reopen the apps after changing the setting.

### 5. Allow camera access (Windows)

Two switches and Device Manager.

1. Open **Settings › Privacy & security › Camera**. Turn on **Camera access** and **Let apps access your camera**, and allow desktop apps.
2. Right-click Start and open **Device Manager**. Look under **Cameras** or **Imaging devices**. If the Elgato camera shows a warning icon, right-click it, choose **Uninstall device**, unplug the camera and restart. Windows reinstalls the driver when you plug it back in.
3. Run Windows Update, including optional driver updates, to get current USB controller drivers.

### 6. Reinstall Camera Hub cleanly

Remove, restart, install fresh.

Uninstall Camera Hub (on Windows from **Settings › Apps**; on a Mac with Elgato's uninstaller if one came with your version, or by deleting the app), restart the computer, then install the latest version from Elgato's website.

### 7. Test on another computer

Find out whether it is the camera or the computer.

Plug the camera into a second computer with Camera Hub installed. If it fails there too, the camera or cable is the likely cause; contact Elgato support. If it works, the problem is in the first computer's ports, drivers or software.

## Our take, *worked out*

One rule, one number worked out for this setup, and what we would not spend money or time on.

The rule

### Port before software

When a USB camera disappears, check the cheap, likely causes first: the port, the cable and the power. Reinstalling software comes last.

Worked out

4×

Uncompressed 1080p at 60 fps, which the Facecam sends, is about 2 Gbit/s (1920 × 1080 × 2 bytes × 60 frames). USB 2.0 carries 480 Mbit/s, roughly four times too little. On a USB 2 port or a busy hub the camera may not appear at all.

What we would skip

## Camera working? *Put your script under it*

ScrollCue is a free browser teleprompter. Run it right under your Elgato camera, on an Elgato Prompter, or keyed into OBS.

- [Open ScrollCue: Free, no download or account](https://scrollcue.com/app/)
- [Teleprompter in OBS: Key the script into a private scene](https://scrollcue.com/setup#obs)
- [Elgato Prompter: Use it as a display for ScrollCue](https://scrollcue.com/hardware#more-brands)
- [Windows setup: Script under the webcam](https://scrollcue.com/setup#windows)

3 topics

## Using an Elgato camera *with a teleprompter*

Read your script while looking straight into the Facecam or a camera behind an Elgato Prompter.

01Facecam on a monitor02Elgato Prompter03Streaming in OBSRead the full guideShow less

### Facecam on a monitor

Script directly under the camera.

Mount the Facecam at the top centre of the monitor you face. Open ScrollCue in a narrow window right under it, with the [cue line](https://scrollcue.com/glossary#cue-line) near the top, and read from there. Your eyes stay within a couple of degrees of the lens.

### Elgato Prompter

A built-in screen in front of the lens.

In Camera Hub, set the Prompter's content to **Display** so it acts as a second monitor, then drag a ScrollCue window onto it and make it full screen. See the [Elgato Prompter section](https://scrollcue.com/hardware#more-brands).

### Streaming in OBS

Script visible only to you.

Open ScrollCue's OBS output (Pro), add it as a Window Capture, apply a [Chroma Key](https://scrollcue.com/glossary#chroma-key) filter and place it under your camera in a scene only you see. Full steps are in the [OBS guide](https://scrollcue.com/setup#obs).

6 topics

## Fix by *symptom*

Find the problem you see and go straight to the fix.

01Why does Camera Hub open but show no camera?02Why does my Elgato camera work in Camera Hub but not in Zoom?03Black or frozen image04Camera disconnects and reconnects05Camera Hub crashes or will not open06Stopped working after a system updateRead the full guideShow less

### Why does Camera Hub open but show no camera?

The computer sees the camera but the app doesn't. Check the port, close other camera apps and update Camera Hub.

If the camera shows in your system's device list but not in Camera Hub, another app usually has it open, or Camera Hub needs an update. Quit every video app, update Camera Hub, then unplug the camera, wait ten seconds and plug it back in with Camera Hub open.

### Why does my Elgato camera work in Camera Hub but not in Zoom?

Zoom, Teams or OBS is set to a different camera. Choose the Elgato camera in that app's video settings.

1. Open the app's video settings and choose the Elgato camera by name, not the built-in camera.
2. Quit and reopen the app after plugging the camera in; some apps only list cameras at launch.
3. On a Mac, allow that app in **System Settings › Privacy & Security › Camera**.
4. In OBS, delete and re-add the Video Capture Device source if it stays black.

### Black or frozen image

Shutter, bandwidth or another app.

- Check for a lens cap, a privacy cover or a closed shutter.
- Move the camera to its own USB 3 port; several cameras or a capture card on one controller can run out of bandwidth.
- Lower the resolution or frame rate in Camera Hub to test whether bandwidth is the cause.
- Quit every other app that might be using the camera.

### Camera disconnects and reconnects

Cable, power saving or a hub.

Swap the cable first. On Windows, turn off USB power saving: **Control Panel › Power Options › Change plan settings › Change advanced power settings › USB settings › USB selective suspend setting › Disabled**. Avoid unpowered hubs and front-panel ports with long internal cables.

### Camera Hub crashes or will not open

Reinstall and update drivers.

Restart the computer, install the latest Camera Hub over the old one, and update your graphics drivers on Windows. If it still crashes, do the clean reinstall in step 6 above and test in a new user account to rule out a damaged profile.

### Stopped working after a system update

Permissions and drivers change.

After a macOS update, check the camera permission list again, since apps sometimes need to be re-allowed. After a Windows update, check Device Manager for a warning icon on the camera and install any optional driver updates.

3 topics

## Stop it *happening again*

A few habits keep the camera reliable before every stream or recording.

01Before every stream02Keep software current, but not mid-project03Label the port and cableRead the full guideShow less

### Before every stream

A two-minute check.

1. Plug the camera into the same USB 3 port every time.
2. Open Camera Hub first and confirm a live image.
3. Then open OBS, Zoom or your recording app and select the camera.
4. Record a ten-second test and play it back with sound.

### Keep software current, but not mid-project

Update between shoots.

Update Camera Hub and camera firmware between projects, not an hour before a live stream. A fresh update right before going live is the most common cause of a surprise.

### Label the port and cable

Small, but it saves a lot of time.

Mark the camera's port and cable with tape. The fastest fix for most Camera Hub problems is the right cable in the right port, and labels make that the default.

7 topics

## Once it *works again*

Settings worth checking, and what to tell support if nothing helps.

01Image settings in Camera Hub02Which USB port is USB 3?03What to send Elgato support04Check the camera in System Information (Mac)05Check the camera in Device Manager (Windows)06Elgato Prompter shows no imageRead the full guide · 1 more topicShow less

### Image settings in Camera Hub

Exposure, white balance and framing.

Once the camera shows up, check its image controls in Camera Hub before you go live. Set exposure and white balance by hand if your light is stable, so the image does not drift during a stream. Adjust the field of view or zoom until your eyes sit about a third of the way down the frame.

### Which USB port is USB 3?

How to tell at a glance.

- Ports marked **SS** (SuperSpeed) or with a blue insert are usually USB 3.
- USB-C ports on recent computers are usually USB 3 or faster; check your computer's specifications if unsure.
- Front-panel ports on desktop PCs can be slower or less reliable than ports on the back of the motherboard.

### What to send Elgato support

Speed up the reply.

- Camera model and serial number.
- Camera Hub version and firmware version.
- Computer model, operating system and version.
- Which steps on this page you already tried, and whether the camera works on another computer.
- A screenshot of Device Manager (Windows) or System Information › USB (Mac) with the camera plugged in.

### Check the camera in System Information (Mac)

Is the Mac seeing it at all?

Hold `Option`, open the Apple menu and choose **System Information**, then select **USB** (or **Camera**) in the sidebar. If the camera is not listed with the cable plugged straight into the Mac, the problem is the cable, the port or the camera, not Camera Hub.

### Check the camera in Device Manager (Windows)

Is Windows seeing it at all?

Right-click Start, open **Device Manager** and expand **Cameras**, **Imaging devices** and **Universal Serial Bus controllers**. If the camera never appears when you plug it in, try another cable and port before reinstalling software.

### Elgato Prompter shows no image

Check Display mode and the display settings.

1. Update Camera Hub to version 1.8 or later, which adds the Prompter's Display mode.
2. In Camera Hub, open the Prompter tab and set Content to **Display**.
3. Check that your computer now lists an extra display: **Settings › System › Display** on Windows, **System Settings › Displays** on a Mac.
4. Drag a window, such as ScrollCue in a browser, onto that display and make it full screen.
5. If no extra display appears, reconnect the Prompter's cable directly to the computer and restart.

Source: [Elgato Prompter Display Mode](https://help.elgato.com/hc/en-us/articles/20722239899789-Elgato-Prompter-Display-Mode).

### Laptops with only USB-C ports

Adapters can quietly slow the camera down.

Many laptops have only USB-C ports, so the camera's USB-A cable goes through an adapter or dongle. Cheap adapters and multi-port dongles are often USB 2 internally, which is too slow for a camera that needs USB 3. Use a single USB-C to USB-A adapter rated for USB 3 (5 Gbps or faster), or a direct USB-C cable if the camera supports one, and avoid running the camera through a dongle that also carries a monitor and charging.

3 topics

## A reliable *camera and script workflow*

Put the fixed camera to work with a teleprompter that sits right under it.

01Webcam on the monitor, script under it02Streaming with the script keyed in03Recording to-camera videosRead the full guideShow less

### Webcam on the monitor, script under it

The everyday setup.

Mount the camera at the top centre of the monitor you face and open ScrollCue in a narrow window just below it, with the cue line at the top. On calls, share a window rather than your whole screen. The [Zoom guide](https://scrollcue.com/setup#zoom) covers the details.

### Streaming with the script keyed in

Only you see it.

On Pro, ScrollCue's OBS output is a chromeless window you key into a scene only you see, right under the camera preview. Keep only the parts you must say exactly in it: sponsor reads, disclosures and the outro.

### Recording to-camera videos

Short lines, slow scroll.

Use the narrow column, a slightly slow scroll and the cue line near the top. Record a ten-second test first to check the camera, the light and the eye line together.

15 questions

## Questions, *answered*

Short answers to what people ask before they press play.

01Why did my Elgato Facecam stop working after updating to macOS 27?02Why is my Elgato camera not showing in Camera Hub?03Why does Camera Hub say the camera is in use?04How do I give Camera Hub camera permission on a Mac?05Does the Elgato Prompter need special software for scripts?06What if nothing works?Read all answers · 9 more answersShow less

### Why did my Elgato Facecam stop working after updating to macOS 27?

The Facecam stopping after an update is a known issue with macOS 27 Golden Gate affecting the Facecam and Facecam Pro, and Elgato has a help article on it. The reported workaround is to switch USB Transfer Mode in Camera Hub to Bulk and back, but it helps only a few people. Use another camera until a fix ships, and hold off on the update if you rely on a Facecam.

### Why is my Elgato camera not showing in Camera Hub?

Usually a USB problem: a hub, a charge-only cable or a USB 2 port. Plug it straight into a USB 3 port on the computer with a data cable, close other camera apps and restart.

### Why does Camera Hub say the camera is in use?

Another app has the camera open. Quit OBS, Zoom, Teams, Discord and browser calls, then reopen Camera Hub.

### How do I give Camera Hub camera permission on a Mac?

Open System Settings › Privacy & Security › Camera and switch on Camera Hub and your recording app.

### Does the Elgato Prompter need special software for scripts?

No. In Display mode it acts as a monitor, so any app works on it, including ScrollCue in a browser.

### What if nothing works?

Test the camera on another computer. If it fails there too, contact Elgato support with your camera model and Camera Hub version.

### Why is my Elgato Facecam not showing up in OBS?

Select it as a Video Capture Device, close Zoom or Teams if they are using it, and on a Mac allow OBS in Privacy & Security › Camera. If it is still black, remove and re-add the source.

### Does the Elgato Facecam need USB 3?

Yes. Plug it straight into a USB 3 port on the computer, not a hub or a USB 2 port.

### Why does my camera keep disconnecting on Windows?

Usually the cable or USB power saving. Swap the cable and disable USB selective suspend in Power Options.

### Can I use an Elgato camera with a teleprompter?

Yes. Put ScrollCue directly under the camera, use the Elgato Prompter as a display, or key the script into OBS.

### Why is my Elgato camera image dark or orange?

Exposure or white balance is set automatically for a different light. Set both by hand in Camera Hub after your lights are on.

### Why does my Elgato Prompter show only my wallpaper?

A wallpaper-only Prompter means Display mode is working: the Prompter is an extra monitor. Drag a window, such as ScrollCue, onto it.

### Should I plug my Elgato camera into a hub?

No. Plug it straight into the computer. Hubs and monitor ports are a common cause of cameras dropping out.

### Can I use a USB-C adapter with my Elgato camera?

Yes, if the adapter is rated for USB 3 (5 Gbps or faster). Multi-port dongles are often too slow; plug the camera into a single good adapter or straight into the computer.

### Do I need to reinstall Camera Hub after a Windows or macOS update?

Not usually. Check the camera permission and Device Manager first; reinstall only if the camera still does not appear after a restart.

**Sources:** [Elgato Prompter Display Mode](https://help.elgato.com/hc/en-us/articles/20722239899789-Elgato-Prompter-Display-Mode) · [Elgato: Camera stops working after updating to macOS 27](https://help.elgato.com/hc/en-us/articles/51602759211921-Camera-Stops-Working-after-Updating-to-macOS-27-Golden-Gate) · [Streamer.guide: macOS 27 Facecam report](https://streamer.guide/blog/macos-27-elgato-facecam-not-working) · [Microsoft Windows support](https://support.microsoft.com/windows) · [Apple Mac support](https://support.apple.com/mac). Steps checked 31 Oct 2026; menu names can change between system versions.

· By [Jude Eric](https://scrollcue.com/about#jude-eric) · Updated 31 Oct 2026

## Related *guides*

- [**Home desk setup**Mounting, lighting, cables, budget](https://scrollcue.com/blog/cheap-teleprompter-setup-home)
- [**Hardware teleprompters**Neewer, Desview, Glide Gear and more](https://scrollcue.com/hardware)
- [**MacBook teleprompter**Read right under the notch](https://scrollcue.com/blog/teleprompter-for-macbook)
- [**Setup for calls, OBS and video**Mac, Windows, Zoom, OBS, recording](https://scrollcue.com/setup)

## Camera fixed. Script ready.

Open ScrollCue, put it under your camera and press play.

[Open the app *· Free*](https://scrollcue.com/app/)
